Appendix 2. Full Survey Image Atlas and Source "Reject" Tables
3. Survey Source "Reject" Tables and Metadata Table Formats
c. Survey Scan Information Table Column Descriptions
The following table contains brief descriptions of the parameters in the Survey Scan Information Table, which provides basic metadata for each survey mode scan taken during 2MASS operations. The table is organized according to the broad function and utility of the parameters: positional information, photometric information, source detection statistics, etc.
The columns in the following table are:
- Column Name: The parameter name in the Scan Information Table. Click on this to go to the section of the Explanatory Supplement where the derivation and/or usage of that parameter is described in detail.
- Format: The "C" format of the field in the Scan Information Table. Note that some fields contain null values that will require special handling when parsing the table drawn from either the IRSA/GATOR output or the future ascii ftp versions.
- Units: The units of the parameter. A value of "---" in this column means that the parameter is dimensionless.
- nulls: A "yes" in this column means that this parameter can be null in the Scan Information Table. A "no" means that there will always be a value in this column in the Scan Information Table. Note that null values are represented differently in the IRSA/GATOR output and the ascii DVD or ftp versions.
- Description: A brief description of the parameter and its values.
TABLE 1: Description of Fields in the Scan Information Table | |||||
Column Name | Format | Units | nulls | Description | |
---|---|---|---|---|---|
Primary Information | |||||
scan_key/cntr | %5d | --- | no | The unique identification number for this scan. This column is called scan_key in the DVD and ftp versions of the Scan Information Table and cntr in the IRSA/GATOR version. | |
hemis | %1s | --- | no | Observatory from which data were obtained:
| |
date | %10s | yyyy-mm-dd | no | The observation reference date for this scan expressed in ISO standard format. This is the UT date at sunrise for the night on which the scan was observed. Because it is possible for the UT date to change during a night of observations, the actual UT date for a source can differ from date by one day. Use the Julian Date (jdate) for a more accurate determination of the observation time of the scan. | |
scan | %3d | --- | no | Scan number (unique within date). | |
tile | %6d | --- | no | Tile identification number. | |
Positional Information | |||||
ra | %10.6f | deg | no | Right ascension of scan center for equinox J2000; this is computed from the interior corners ra_[1,2,3,4] and dec_[1,2,3,4] (see below). | |
dec/decl | %10.6f | deg | no | Declination of scan center for equinox J2000; this is computed from the interior corners ra_[1,2,3,4] and dec_[1,2,3,4] (see below). This column is called decl on the DVD versions of the Scan Information Table and dec in the IRSA/GATOR version. | |
glon | %7.3f | deg | no | Galactic longitude of scan center, as computed from ra and dec above. Galactic coordinates are derived by precessing reconstructed ra and dec to B1950, and performing rotational transformation into the lII, bII coordinate system. | |
glat | %7.3f | deg | no | Galactic latitude of scan center, as computed from ra and dec above. Galactic coordinates are derived by precessing reconstructed ra and dec to B1950, and performing rotational transformation into the lII, bII coordinate system. | |
ra_1 | %10.6f | deg | no | J2000 right ascension of the eastern corner at start of scan. This is the corner fully covered by all three bands. | |
dec_1 | %10.6f | deg | no | J2000 declination of the eastern corner at start of scan. This is the corner fully covered by all three bands. | |
ra_2 | %10.6f | deg | no | J2000 right ascension of the western corner at start of scan. This is the corner fully covered by all three bands. | |
dec_2 | %10.6f | deg | no | J2000 declination of the western corner at start of scan. This is the corner fully covered by all three bands. | |
ra_3 | %10.6f | deg | no | J2000 right ascension of the eastern corner at end of scan. This is the corner fully covered by all three bands. | |
dec_3 | %10.6f | deg | no | J2000 declination of the eastern corner at end of scan. This is the corner fully covered by all three bands. | |
ra_4 | %10.6f | deg | no | J2000 right ascension of the western corner at end of scan. This is the corner fully covered by all three bands. | |
dec_4 | %10.6f | deg | no | J2000 declination of the western corner at end of scan. This is the corner fully covered by all three bands. | |
General Information | |||||
sd | %1s | --- | no | Scanning direction:
| |
qual | %2d | --- | no | Quality score for scan:
| |
hgl | %1d | --- | no | Special flag indicating whether or not this scan has a single-frame H-band
or J-band
electronic glitch:
| |
cld | %1d | --- | no | Special flag indicating whether or not a cloud was found in the scan
after comparison of its photometry to that of overlapping scans in the
database:
| |
xph | %1d | --- | no | Special flag indicating whether or not another photometric problem, not obviously
cloud related, was found in the scan after comparing its photometry to that
of overlapping scans:
| |
anom | %1d | --- | no | Special flag indicating whether or not an unusual problem was found in the Atlas Images for
this scan. Such problem include, but are not limited to, residual meteor
trails, satellite trails, insect trails, and unusual reflections or glints
from bright stars:
| |
Time of Observation | |||||
ut | %9.6f | hr | no | Universal Time (UT) at beginning of scan. | |
jdate | %12.4f | day | no | Julian Date at beginning of scan. | |
Telescope and Instrument Fields | |||||
airm | %4.2f | --- | no | Airmass at beginning of scan. | |
zd | %4.1f | deg | no | Scan's distance from the zenith at beginning of scan. | |
ha | %9.6f | hr | no | Hour angle at beginning of scan. | |
rh | %2d | % | no | Relative humidity of telescope enclosure at beginning of scan. | |
air_temp | %4.1f | deg C | no | Air temperature at beginning of scan. | |
tel_temp | %4.1f | deg C | no | Telescope girdle temperature at beginning of scan. This temperature was used to adjust telescope focus to compensate for variations with temperature. | |
focus | %5d | --- | no | Focus setting of telescope at beginning of scan. This is a measure of the position of the focus mechanism, in units of 1.25 microns, relative to a reference position. This reference position changed each time the telescope was collimated. | |
hry | %1s | --- | no | Flag indicating the H-band array configuration for the camera:
| |
c_strat | %1s | --- | no | Flag indicating the calibration strategy for this night's data:
| |
Photometric Information | |||||
j_zp_ap | %7.4f | mag | no | Photometric zero-point for J-band aperture photometry. | |
h_zp_ap | %7.4f | mag | no | Photometric zero-point for H-band aperture photometry. | |
k_zp_ap | %7.4f | mag | no | Photometric zero-point for Ks-band aperture photometry. | |
h_zperr_ap | %6.4f | mag | no | RMS-error of zero-point for H-band aperture photometry | |
k_zperr_ap | %6.4f | mag | no | RMS-error of zero-point for Ks-band aperture photometry | |
Source Detection Statistics | |||||
j_n_snr10 | %6d | --- | no | Number of point sources at J-band with SNR>10 (instrumental mag <=15.8) | |
h_n_snr10 | %6d | --- | no | Number of point sources at H-band with SNR>10 (instrumental mag <=15.1) | |
k_n_snr10 | %6d | --- | no | Number of point sources at Ks-band with SNR>10 (instrumental mag <=14.3) | |
n_ext | %3d | --- | no | Number of regular extended sources detected in scan. | |
Seeing Statistics | |||||
j_shape_avg | %5.3f | --- | no | J-band average seeing shape for scan. The seeing full-width at half maximum (in arcseconds) can be obtained from the approximate relation FWHM(arcseconds) = 3.13*(j_shape_avg) - 0.46. | |
h_shape_avg | %5.3f | --- | no | H-band average seeing shape for scan. The seeing full-width at half maximum (in arcseconds) can be obtained from the approximate relation FWHM(arcseconds) = 3.13*(h_shape_avg) - 0.46. | |
k_shape_avg | %5.3f | --- | no | Ks-band average seeing shape for scan. The seeing full-width at half maximum (in arcseconds) can be obtained from the approximate relation FWHM(arcseconds) = 3.13*(k_shape_avg) - 0.46. | |
j_shape_rms | %5.3f | --- | no | RMS-error of J-band average seeing shape. | |
h_shape_rms | %5.3f | --- | no | RMS-error of H-band average seeing shape. | |
k_shape_rms | %5.3f | --- | no | RMS-error of Ks-band average seeing shape. | |
j_2mrat | %5.3f | --- | no | J-band average 2nd image moment ratio. | |
h_2mrat | %5.3f | --- | no | H-band average 2nd image moment ratio. | |
k_2mrat | %5.3f | --- | no | Ks-band average 2nd image moment ratio. | |
Sensitivity Statistics | |||||
j_psp | %6.3f | --- | no | J-band photometric sensitivity parameter (PSP). | |
h_psp | %6.3f | --- | no | H-band photometric sensitivity parameter (PSP). | |
k_psp | %6.3f | --- | no | Ks-band photometric sensitivity parameter (PSP). | |
j_pts_noise | %7.3f | --- | no | The base-10 logarithm of the characteristic J-band point source scan noise, in units of log(mJy). This is the mode of the distribution of the noise-equivalent flux densities for all J-band R2-R1 detections in the scan. The noise-equivalent flux density for each detection is given by 1603x103(mJy)*1.0857/m, where m is the photometric uncertainty, in magnitudes, before correction. 1603x103 mJy was a preliminary estimate of the J-band flux-for-zero-magnitude, and it differs slightly from the final estimate of 1592x103 mJy that is described in VI.4.a. To adjust the given value of j_pts_noise for the final calibration, subtract 0.0030. | |
h_pts_noise | %7.3f | --- | no | The base-10 logarithm of the characteristic H-band point source scan noise, in units of log(mJy). This is the mode of the distribution of the noise-equivalent flux densities for all H-band R2-R1 detections in the scan. The noise-equivalent flux density for each detection is given by 1075x103(mJy)*1.0857/m, where m is the photometric uncertainty, in magnitudes, before correction. 1075x103 mJy was a preliminary estimate of the H-band flux-for-zero-magnitude, and it differs slightly from the final estimate of 1024x103 mJy that is described in VI.4.a. To adjust the given value of h_pts_noise for the final calibration, subtract 0.0211. | |
k_pts_noise | %7.3f | --- | no | The base-10 logarithm of the characteristic Ks-band point source scan noise, in units of log(mJy). This is the mode of the distribution of the noise-equivalent flux densities for all Ks-band R2-R1 detections in the scan. The noise-equivalent flux density for each detection is given by 698.1x103(mJy)*1.0857/m, where m is the photometric uncertainty, in magnitudes, before correction. 698.1x103 mJy was a preliminary estimate of the Ks-band flux-for-zero-magnitude, and it differs slightly from the final estimate of 666.8x103 mJy that is described in VI.4.a. To adjust the given value of k_pts_noise for the final calibration, subtract 0.0199. | |
j_msnr10 | %5.2f | --- | no | The J-band magnitude at which SNR=10 is achieved for this scan, estimated using the photometric sensitivity parameter j_psp and zero point offset j_zp_ap. This estimate does not take into account the effect of confusion noise in high source density regions. | |
h_msnr10 | %5.2f | --- | no | The H-band magnitude at which SNR=10 is achieved for this scan, estimated using the photometric sensitivity parameter h_psp and zero point offset h_zp_ap. This estimate does not take into account the effect of confusion noise in high source density regions. | |
k_msnr10 | %5.2f | --- | no | The Ks-band magnitude at which SNR=10 is achieved for this scan, estimated using the photometric sensitivity parameter k_psp and zero point offset k_zp_ap. This estimate does not take into account the effect of confusion noise in high source density regions. | |
Information on Previous Releases | |||||
cat | %1d | --- | no | Flag indicating whether the scan is included in the
2MASS
All-Sky Data Release.
If an entry in this table has cat="1", there will be a corresponding entry in the All-Sky Data Release Scan Information Table with the same value of scan_key/cntr. |
[Last Updated: 2006 September 28; D. Kirkpatrick, R. Cutri, T. Evans]
Return to A2.3.