Overlap Input Parameters
Parameter names in the command line version |
Parameter names in the GUI version |
| |
Switch on/off (1/0) module | Module name in GUI |
| |
compute_uncertainties_internally | S/N estimator |
have_uncertainties | N/A (assumed to be 1 if uncertainty images are given in Sigma List File) |
run_fiducial_image_frame | Fiducial Image Frame |
run_medfilter | Med Filter |
run_detect | Detect |
run_mosaic_interp | Mosaic Interpolate |
compute_overlap_correction | Overlap Correction |
mosaic_corrected_images | Quick Look Mosaic |
OverlapCorrectionTable | N/A** |
MOSAIC_IMG_FILE_NAME | N/A** |
COMPUTE_OVERLAP_NAME | N/A** |
OVERLAP_CORR_FILE_NAME | N/A** |
ZOD_SUB_DIR | N/A** |
| |
Initial Setup |
IMAGE_STACK_FILE_NAME | Image Stack File |
OUTPUT_DIR | Output Directory |
| |
Optional Input & Mask Files (within Initial Setup) |
SIGMALIST_FILE_NAME | Sigma List File |
DCE_STATUS_MASK_LIST | DCE Status Mask List |
DCE_Status_Mask_Fatal_BitPattern | Fatal Mask Bit Pattern |
RMASK_LIST | Rmask List File |
RMask_Fatal_BitPattern | Fatal Mask Bit Pattern |
PMASK_FILE_NAME | Pmask FITS File |
PMask_Fatal_BitPattern | Fatal Mask Bit Pattern |
FIF_FILE_NAME | FIF file |
| |
Overlap Settings |
N/A (MOSAIC_PIXEL_RATIO overrides MOSAIC_PIXEL_SIZE) | Pixel by Size |
N/A (MOSAIC_PIXEL_RATIO overrides MOSAIC_PIXEL_SIZE) | Pixel by Ratio |
MOSAIC_PIXEL_SIZE_X | Pixel Size X |
MOSAIC_PIXEL_SIZE_Y | Pixel Size Y |
MOSAIC_PIXEL_RATIO_X | Pixel Ratio X |
MOSAIC_PIXEL_RATIO_Y | Pixel Ratio Y |
delete_intermediate_files | Delete Intermediate Files |
USE_REFINED_POINTING | Use Refined Pointing |
apply_zodiacal_subtraction | Apply Zodiacal Subtraction |
save_zodiacal_light_images | Save Zodiacal Subtracted Images |
| |
SNESTIMATORIN | S/N estimator |
Gain | Gain in e-/image unit |
Read_Noise | Read Noise in e- |
Confusion_Sigma | Confusion Sigma in e- |
SIGMA_DIR*** | S/N estimator output subdirectory |
| |
| |
FIDUCIALIMAGEFRAMEIN | Fiducial Image Frame |
Edge_Padding | Edge Padding |
Projection_Type | Projection |
Coordinate_System | Coordinate System |
CROTA2 (= A) | Use average input orientation |
CROTA2 | CROTA2 |
| |
MEDFILTER | Med Filter |
Window_X | Window X |
Window_Y | Window Y |
N_Outliers_Per_Window | Outliers / Window |
Sbkg_Filt_Size_for_Med | SExtractor background filter size |
Use_Sbkg_for_Med | Use SExtractor background estimation |
MEDFILTER_DIR*** | Med Filter output subdirectory |
| |
DETECT | Detect |
Detection_Max_Area | Detection Max Area |
Detection_Min_Area | Detection Min Area |
Detection_Threshold | Detection Threshold |
Threshold_Type | Threshold Type |
DETECT_DIR*** | Detect output subdirectory |
| |
MOSAICINTIN | Mosaic Interpolate |
INTERP_METHOD | Interpret Method |
FINERES | Fine Res |
DRIZ_FAC | Drizzle Factor |
GRID_RATIO | Grid Ratio |
ALPHA | Alpha |
INTERP_DIR*** | Mosaic Interpolate output subdirectory |
mask_bright | Mask bright object |
| |
COMPUTEOVRLAPCORRIN | Overlap Correction |
TOP_THRESHOLD | Top Threshold |
BOTTOM_THRESHOLD | Bottom Threshold |
MIN_IMG_NUM | Minimum Number of Images |
apply_overlap_correction | Apply Overlap Correction |
OVERLAP_CORR_DIR*** | N/A |
| |
MOSAICCOADDIN | Quick Look Mosaic |
TILEMAX_X | Mosaic Co Adder: Tile Max X |
TILEMAX_Y | Mosaic Co Adder: Tile Max Y |
COADDER_DIR*** | N/A |
Note -- All bold-faced names are the modules or the names of parameter blocks in the GUI flow.
Note -- N/A** means that these parameters are set implicitly by the GUI.
*** -- set this parameter near the top of the namelist, not in the parameter block for the module.
|