date=07.0413
fitsdir=archive
slitpa = 180.

#Slit is in East-West orientation
#

#####################
PI=Crisp
PID=2007A075
#####################

slitpa = 90.

shift=true
weight=true

#Target is Venus
objtype=target
#Looking at CO2 features
#setting wavenumber to 793cm-1
#focus=-1.8
#3001 was a stare by mistake, so not using
#venus.3001
#using 790.6899 in order 4
hrr=9.841
wno0=790.718
venus.3002
venus.3003
#3004 has Mars flats, with number of black set to 4
venus.3004

#####################
PI=Greathouse
PID=2007A031
#####################


#			Changed target to A CMa
objtype=calibration
#changed wavenumber to 1231 cm-1
#Gain set to 50
#using 1230.2756 in order 4
hrr=9.922
wno0=1231.018
#for 3005 we're peaking through out
acma.3005
#for 3006, peaking through pair 8
hrr=9.920
wno0=1231.019
acma.3006
acma.3007
#3008 should have been a scan but wasn't, so not going to pipe
#acma.3008


#			SATURN
objtype=target
#			Scan
shift=false
weight=false
subsky=true
skyint = 1 3
sumscan=false
hrr=9.924
wno0=1231.014
sat.3009
#after 3009, check pointing, off by 0.6W 0.1N
sat.3010
#off by 0.9E 0.1N
sat.3011
#off by 1.6W 0.4S
sat.3012
#off by 0.4W 0.6S
sat.3013
#off by 1.9E 0.2N
hrr=9.925
wno0=1231.014
sat.3014
#off by 1.0W 0.6S
sat.3015
#off by 1.1W 1.2S
sat.3016
#off by 1.9W 0.4S
sat.3017
#off by 1.1W 1.7S
sat.3018
#off by 1.0W 0.1N
sat.3019
#off by 1.1E 0.1N
wno0=1231.014
sat.3020
#off by 0.4W 0.1N
hrr=9.924
sat.3021
#off by 1.0W 0.4S
#	Look at 3022, it may have bad features
hrr=9.924
wno0=1231.015
sat.3022
#off by 5.0E 0.2N
hrr=9.922
wno0=1231.017
sat.3023
#2.0E 1.1S
wno0=1231.017
sat.3024
# 1.1E 0.1N
hrr=9.921
sat.3025
#wasn't off
#3026 has bounce
bounce=-0.2
#	When bounce=-0.1, 29 pairs exceeded bounce limit in 3026
#	When bounce=-0.2, it worked, left it as such.
#	In both cases, there were strong features along edges
sat.3026
#1.9W 0.5S
#	3027 has bounce in first scan
#	When bounce=-0.2 or -0.1, 22 pairs exceeded bounce limit.
#	strong features along edges.
bounce=-0.1
hrr=9.919
wno0=1231.007
sat.3027
#	These features along the sides are staying, and leaving bounce
#	on is helping get rid of them, so I'm leaving bounce=-0.1
#	bounce=-0.2 doesn't make any visible difference
#0.9W 0.3S
hrr=9.917
wno0=1231.022
sat.3028
#1.4E 0.3S
sat.3029
#1.4E 0.1S
#	The top 3 lines of 3030 are high
sat.3030
sat.3031

#####################
PI=Harper
PID=2007A012
#####################

#Switched programs at midnight
#First up, Arcturus (alpha Boo)
objtype=calibration
shift=true
weight=true
subsky=true
hrr=9.8755
wno0=1231.0396
aboo.3032
aboo.3033

slitpa = 180.


#Changed wavelength settings to new nominal center at 408 cm^-1
#Checking by looking for H20 lines in 6th order around 815 cm^-1
hrr=9.9296
wno0=815.1298
skip=1 5
aboo.3034

hrr=9.509
wno0=-407.565
#As far as Greathouse can tell the previous 9.9296 hrr is correct.  if that is the case then 10.844 must be correct as we only moved the filter.
sumspec=aboo.408
skip=14 16
aboo.3035
bounce=-0.1
skip=8 11
aboo.3036
skip=10 16
aboo.3037
#Increased nod wait before aboo.3038 hoping to weaken bounce
skip=4
skip=11
aboo.3038
#Background steadily climbed during aboo.3039.  Clouds?
aboo.3039
skip=1 8
aboo.3040
storesum
bounce=0

#Getting asteroid 4 Vesta as a divisor
objtype=calibration
#Check wavenumber center here at 12 microns
#nominal wno0 =    814.447
hrr=9.9558
wno0=814.4461
vesta.3041
#Back to nominal center at 408 cm^-1
wno0=-407.223
vesta.3042
vesta.3043
vesta.3044

#On to alpha Her
objtype=target
#Check wavenumber center here again at 12 um
weight=false
shift=false
extmode=nod
hrr=9.9530
wno0=815.1105
aher.3045
#Nominal wno0 here is 815.111
weight=true
shift=true
wno0=-407.555
#And back to 24 um now
aher.3046
aher.3047
skip=14
aher.3048
aher.3049

#Next up, G Her
objtype=target
#Wavenumber cal at 12um
#Chose to nod off slit
#Nominal wavenumber center here is wno0=815.115
weight=false
shift=false
subsky=false
spike=0
extmode=nod
hrr=9.9500
wno0=815.1130
gher.3050
wno0=-407.556
weight=true
shift=true
subsky=true
sumspec=gher.408
gher.3051
#Bad bounce in pair five of gher.3052
#Actually the bounce is bad throughout that file
bounce=-0.1
skip=5
gher.3052
#Increased nod wait before gher.3053 to help with the bounce situation
gher.3053
gher.3054
gher.3055
#Big bounce in pair fifteen of gher.3056
skip=15
gher.3056
#Bounce in pair two of gher.3057
#There is bounce throughout this file
skip=2
gher.3057
#Bounce in pair eleven of gher.3058
#Last three pairs 13-16 have pretty bad bounce
skip=13 16
gher.3058
#Bounce in pair one of gher.3059
#Again, significant bounce throughout this file
#Bounce in pair thirteen and fifteen
skip=1 9
skip=13
skip=15
gher.3059
#Bounce in pairs twelve and fourteen in gher.3060
skip=12
skip=14
gher.3060
storesum
#Onward and upward to alpha Sco.  Well, onward, anyway


objtype=target
#Wavenumber calibration first at 12 um
#Nominal wno0 here is 815.112
hrr=9.9530
wno0=815.1105
asco.3061
wno0=-407.555
sumspec=asco.408
asco.3062
#Moved off the slit for pair four of asco.3063 (probably
#only have a positive beam)
asco.3063
storesum


#Changed settings here to nominal wavenumber center 416 cm^-1
#Going for the Fe I line at 415.99 cm^-1
#No identifiable atmospheric features in asco.3064 or asco.3065

#Back to alpha Her
objtype=target
hrr=9.988
wno0=415.825
sumspec=aher.416
weight=true 
shift=true
subsky=true
aher.3070
aher.3068
aher.3069
aher.3070
aher.3071
storesum

end