#	pipescript for sep12/34

####		almost completely clear
####		start with engineering time.
###		do pupil movies as we slew around the sky 

date=12.1004
fitsdir=archive
slitpa = 180.

#########################
PI=Engineering
PID=2012B999
#########################

objtype=target

tortmode = none
flatmode = none
weight = false
###		at zenith
pup.6000
####		also at zenith
pup.6001
###		movie going north 45 degrees
###			jumps dec = 53 and 60 degrees.  frames: 66 and 76
pup.6002
###		back at zenith
pup.6003 
###		going to HA=3
###			jumps at HA=2:32.  Dome gets in the way
pup.6004
###		going back to zenith
###			no big jumps
pup.6005	
###		going to HA = -3
###			6006 at zenith and ended early to move dome
pup.6006
###			jump at HA = -2:21
###			dome at end
pup.6007
###		going back to zenith
###			no jumps, just smooth motion
pup.6008
###		going south to Dec = -26
###			couple jumps and some smooth motion
pup.6009
###		going further south to Dec = -41 after moving lower shutter
pup.6010
###		back to zenith.  will cross lower shutter
pup.6011	
###		6012 was inadvertant
pup.6012
flatmode = blksky
tortmode = flat

####################
PI=Orton
PID=2012B011
#####################

objtype=calibration

###		Change to 587 cm-1 in med mode
###		Go to alpha Tau for focus and boresight

longslit
subsky = true
shift = true
weight = true
###		Go to callisto for quick divisor
#setwno			use 587.8184
wno0 = 586.985
cal.6013

objtype=target

###		Go to Jupiter and scan
shift = false
weight = false
subsky=true
skyint= 1 3
sumscan=false
###			offset 31 0 with -.7 0 steps 91 points
###			move 2" S before scan 2
jup.6014
###		offset 34 0 
jup.6015
###		

###		Change to 540 cm-1.  
###			adjust EW rate
###			offset 31 -2.5 (account for NS boresight error)
#setwno		use 539.5770 (center of array)
wno0 = 539.299
jup.6016
###			offset 29 -2.5
jup.6017

objtype=calibration

###		go to Callisto for quick nodded divisor
shift = true
weight = true
subsky = true
cal.6018

###		change to 747 cm-1
#setwno			use 746.4209 (blend, but med mode)
wno0 = 747.302
cal.6019

objtype=target

###		Back to Jupiter for a scan/
shift = false
weight = false
subsky=true
skyint= 1 3
sumscan=false
jup.6020
jup.6021
###             go to Callisto for divisor for next
###		setting at 1150 cm-1
###		jup.6022 is actually Callisto

shift = true
weight = true
subsky = true
#setwno # using line at 1150.0956 cm^-1
wno0 = 1149.842
jup.6022

###		scan of jupiter at 1140 cm^-1
shift = false
weight = false
subsky = true
skyint = 1 3
sumscan=false
jup.6023	## bad fringing, may return at a different airmass

objtype=calibration

## go to 980 cm^-1 on Callisto, refocused

shift = true
weight = true
subsky = true
#setwno  #using line at 979.7 (by eye)
wno0=979.994
cal.6024

objtype=target

###		Back to Jupiter for a scan
shift = false
weight = false
subsky =true
skyint = 1 3
sumscan=false
jup.6025

###  changed setting back to 1150 cm^-1 to do scan of Jupiter
#setwno # 
wno0 = 1149.897
jup.6026

objtype=calibration

## taking diviser star at 1150 cm^-1
shift = true
weight = true
subsky = true
cal.6027

## starting a new setting at 1247.5 cm^-1
## move in Callisto
#setwno  # using line at 1246.7460
wno0 = 1247.563
cal.6028 # ended after 12 pairs, in order to beat incoming clouds

objtype=target

weather= clouds
shift = false
weight = false
subsky = true
skyint = 1 3
sumscan=false
jup.6029 ## cloudy, during scan 4, around frame 324, data taking "decided" to pause... 

objtype=calibration

## move in Callisto
shift = true
weight = true
subsky = true
#setwno # using line at 586.20518 cm^-1
wno0 = 586.709
cal.6030 ## setting is 587cm^-1

objtype=target

shift = false
weight = false
subsky = true
skyint = 1 3
sumscan=false
jup.6031 ## nod weight short, may cause trouble with 1st sky of scan 2. 
jup.6032  ## moved 1" before scan 2

#setwno # line @539.5770
wno0 = 539.225
jup.6033 # 540cm^-1
jup.6034

objtype=calibration

shift = true
weight = true
subsky = true
cal.6035

######################
PI=Encrenaz
PID=2012B008
######################

objtype=calibration

#### Done with Jupiter, moving to Procyon to prep for Venus @ 1348cm^-1
crossdisp
shift = true
weight = true
subsky = true
#setwno # 1345.5380 in 6th 
wno0 = 1348.236
hrr = 9.886 
skip = 11
sumspec = acmi.so2
acmi.6036 # skip pair 11
skip = 1 6
acmi.6037 # skip 1-6
acmi.6038
storesum

objtype=target

shift = false
weight = false
subsky = true
skyint = 1 3
sumscan=false
#ven.6039 # probably junk
#ven.6040 # junk

## forgot "mars flats"
ven.6041
ven.6042 # moved 2" west between scans 1 and 2
ven.6043

#marsflats = 4
ven.6044
ven.6045
ven.6046
ven.6047
ven.6048
ven.6049
ven.6050
ven.6051
ven.6052


## change wv to 530 cm^-1
wno0 = 529.756
ven.6053 # -22 E 0 N, 49 pts
ven.6054 # -25 E 0 N, 61 pts
ven.6055 # same offsets, so doing just 1 scan
ven.6056
ven.6057 ##
ven.6058 ## -22 0 N, 49pts, moved 2" W between scans 1 & 2
#moved 3" E between scans 2 and 3, moved 3N 3E between scans #3&4;did not come off planet during scan 2
ven.6059 ## scan 4 didn't get off disk
ven.6060 ## offset -16E 0 N,npts=57, scan 1 was good, a cloud comes in scan 2, stopped afterscan 3

end